How to Choose Garage Shelving Units: A Complete Buying Guide for 2026
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This shelf unit buying guide helps you match storage needs to specific garage dimensions and load requirements. You will learn how to evaluate width, depth, and tier count to ensure your new rack fits the space. The recommendations in this list were chosen strictly from their published specifications, so you can trust the data without guessing.
You will decide between heavy-duty steel options for workshops or plastic racks for light household items. The guide walks through key specs like weight capacity and assembly complexity. With 8 products ranked by their published performance, you can select the right unit for your garage. Focus on the numbers that matter, such as overall dimensions and material type, to avoid buying the wrong size.
Our top pick: ROOMFAVE 40"W 5-Tier Heavy Duty Shelving.
Key Specs for Choosing Garage Shelving
Weight Capacity and Load
The total load capacity determines how much gear you can safely store. Higher limits, such as 3000 lbs on the SISESOL or VEVOR units, handle heavy toolboxes and engine parts without sagging. Lower-capacity plastic racks suit light bins and seasonal decor. You must check the per-shelf limit, not just the total. Overloading causes shelf warping or frame failure. If you store heavy items, choose steel models with reinforced joints. Lighter units may tip if top shelves bear too much weight. Always distribute weight evenly across all tiers to maintain stability and prevent accidents.
- Total weight limit rating
- Per-shelf load specification
- Steel gauge or thickness
Width and Span
Width defines how many large items fit side-by-side. Standard garage units range from 35.5 inches to 60 inches. Narrow units like the REIBII fit tight corners or narrow aisles. Wider units, such as the 60-inch Seville Classics or Letaya, accommodate bulky equipment or multiple bins. Ensure the unit fits your wall space with clearance for doors. Wider spans may require more robust bracing to prevent bowing. Measure your available wall space carefully before purchasing. Consider how you will access items on wide shelves. Deep items may need to be placed at the front for visibility.
- Overall unit width in inches
- Clearance for nearby doors
- Shelf span without sagging
Depth and Storage Volume
Depth affects how far back you can place items. Shelves around 16 to 20 inches deep suit most garage bins and boxes. Deeper units, like the SISESOL at 24 inches, hold larger tool chests or equipment cases. Shallow units save floor space in narrow garages but limit storage for deep items. You must match depth to your largest containers. Overly deep shelves make back items hard to reach. Consider using bins of uniform depth to maximize space. Measure your existing storage containers to ensure they fit securely on the shelves without overhanging.
- Shelf depth in inches
- Bin compatibility check
- Floor space footprint
Tier Count and Height
Tier count and height determine vertical storage efficiency. Five-tier units maximize storage in standard garages with 8-foot ceilings. Four-tier models like the Letaya offer higher per-shelf clearance for tall items. Ensure the unit height fits your ceiling with room for access. Higher units require stable bases to prevent tipping. More tiers provide more storage but may reduce per-shelf load capacity. You must balance vertical space with ease of access. Top shelves may be difficult to reach for heavy items. Consider your average height and reach when selecting tier count.
- Total unit height
- Number of shelves
- Ceiling clearance space
Material and Durability
Material impacts longevity and resistance to garage conditions. Steel shelves offer high strength for heavy tools. Plastic units, like the Sterilite rack, resist rust and are lighter. Galvanized steel, such as the REIBII model, provides corrosion resistance for damp environments. You must choose material based on your garage climate. Humid garages benefit from rust-resistant finishes. Heavy tool storage requires steel frames. Plastic may crack under extreme cold or heavy loads. Check for powder-coated finishes to protect against scratches and moisture in busy workshop environments.
- Steel or plastic construction
- Rust-resistant coating type
- Frame joint reinforcement
Application and Environment
The intended application guides material and feature selection. Garage shelving must withstand dust, temperature changes, and occasional moisture. Warehouse units often have higher load ratings for industrial use. Kitchen-rated racks, like the NSF-certified Seville Classics, offer hygiene standards for food storage. You must match the unit to your specific environment. Outdoor or unheated garages need weather-resistant materials. Indoor closets may only require lightweight plastic. Verify the manufacturer's recommended application. Using a unit outside its intended scope may void warranties or reduce safety.
- Recommended environment type
- NSF or commercial rating
- Weather resistance features
Assembly and Setup
Assembly complexity affects installation time and stability. Some units require tools and precise alignment. Others offer tool-free or quick-assembly designs. You must consider your comfort level with construction. Complex assemblies may lead to instability if not tightened correctly. Pre-drilled holes and labeled parts simplify setup. Check if all hardware is included. Some units may require additional wall anchoring for safety. Read instructions before starting. Proper assembly ensures the unit remains stable under load. Tighten all bolts to the specified torque to prevent loosening over time.
- Tool-free assembly option
- Included hardware list
- Wall anchoring requirement
Types of Garage Shelving Units
Heavy-Duty Steel Shelving
Steel racks like the VEVOR or SISESOL models offer maximum load capacity, often rated for 3000 lbs. These units suit garages storing heavy toolboxes, engine parts, or bulk supplies. The trade-off is weight; the SISESOL unit alone weighs 70 pounds, making assembly a two-person job. You get robust stability and wide spans, but the metal construction requires careful handling during setup. These are best for permanent, high-capacity storage in spacious areas.
Narrow Galvanized Shelving
Galvanized steel shelves, such as the REIBII or HOMEDANT units, feature corrosion-resistant coatings ideal for damp environments. Their narrower widths, around 35.5 inches, fit tight garage corners or split-unit layouts. The REIBII model measures 35.5 inches wide by 16 inches deep, saving floor space. While excellent for moisture resistance, the reduced width limits the size of items you can store. This type suits organizers prioritizing flexibility and rust protection over wide-span capacity.
Plastic Utility Racks
Plastic racks, like the Sterilite 5-Tier Utility Rack, provide a lightweight and moisture-resistant option for light household storage. They are easy to assemble and move, making them suitable for small spaces or temporary setups. The grey plastic construction resists rust but offers significantly lower weight limits compared to steel. You sacrifice heavy-duty load bearing for versatility and ventilation. This type is best for storing bins, cleaning supplies, or light items in dry areas.
Common Shelving Mistakes to Avoid
Ignoring shelf depth for tool chests
Tool chests often protrude from cabinets. If your shelf depth is too shallow, the chest may overhang or tip. Measure your heaviest storage units first. Choose shelves with enough depth to fully support the base without creating a hazardous overhang or unstable stacking condition.
Overloading the top tier
The highest shelf usually has the lowest weight limit per bay. Placing heavy engine parts or full toolboxes here risks sagging or collapse. Reserve the top tier for lightweight items like bins or covers. Keep heavy gear on the lower, more stable levels for safety.
Placing units near garage doors
Shelving near automatic doors can be damaged by opening mechanisms or vehicles. This creates a hazard for both your gear and your car. Anchor your units away from door swings. Ensure there is ample clearance for safe vehicle entry and exit without striking the storage rack.
Skipping anti-tip anchoring
Unanchored racks can tip forward if you pull heavily from one side or if seismic activity occurs. This endangers anyone nearby. Always secure the unit to wall studs using the provided hardware. This simple step stabilizes the entire structure and prevents dangerous tipping accidents during use.
Neglecting floor levelness
Uneven concrete floors cause wobbly shelves that shift under load. This instability damages stored items and risks injury. Use shims or adjustable feet to level the base. Ensure all legs touch the ground evenly before loading. A level foundation is critical for long-term structural integrity and safety.
Quick picks
Our 8 picks
ROOMFAVE 40"W 5-Tier Heavy Duty Shelving
Best for: Heavy loads in standard width garages
- Total Load Capacity
- 2300 lbs
- Tiers
- 5
- Width
- 40"
- Depth
- 20"
- Height
- 72.2"
- Per-Shelf Capacity
- 460 lbs
This ROOMFAVE unit offers 5 tiers of storage with a total capacity of 2300 lbs. Each shelf holds 460 lbs thanks to 5mm thickened MDF panels and reinforced metal uprights. The 40-inch width and 20-inch depth fit standard garage spaces. You get two units per package. The boltless assembly allows for quick setup. Adjustable shelf heights let you customize the layout for various items.
Pros
- 2300 lbs total load capacity across 5 tiers
- 460 lbs per-shelf capacity with reinforced ribs
- Boltless interlocking design for 10-minute assembly
- Rolled edges reduce sharp corners for safety
- Adjustable shelf heights for flexible organization
Cons
- MDF panels are less durable than solid steel
- 20-inch depth limits storage for large bins
- No app or remote connectivity features
Good fit if
- You need heavy-duty support for bulk items
- You want to save time with boltless assembly
- You require two identical units for symmetry
Skip if
- You need deep storage for large equipment
- You prefer solid metal shelves over MDF
- You want smart connectivity or app control
Verdict: ROOMFAVE 5-Tier Black Garage Shelving, 2-Pack provides strong support for heavy loads in tight spaces. It suits buyers who value quick setup and high weight limits over deep storage or smart features.
REIBII 72" 5-Tier Galvanized Shelving
Best for: narrow indoor spaces and split-unit setups
- Total Load Capacity
- 2020 lbs
- Tiers
- 5
- Width
- 35.5 inches
- Depth
- 16 inches
- Height
- 72 inches
- Per-Shelf Capacity
- 404 lbs
This 35.5-inch wide, 72-inch tall unit offers five tiers of storage. The galvanized steel frame resists indoor corrosion, while the flat MDF panels provide solid surfaces for boxes and tools. It supports 2,020 lbs total weight. You can adjust shelf heights or split the rack into two separate units. This setup helps organize garage corners or pantry spaces without floor clutter.
Pros
- Galvanized steel frame resists indoor moisture and corrosion
- Flat MDF panels offer solid storage for boxes and goods
- 2,020 lbs total capacity with 404 lbs per shelf limit
- Adjustable shelf levels accommodate items of various heights
- Unit splits into two separate racks for flexible placement
Cons
- 16-inch depth is narrower than standard garage shelving
- MDF panels are not suitable for outdoor or wet environments
- Limited to indoor use only due to material composition
Good fit if
- You need corrosion-resistant shelving for a damp garage or basement
- You want to split one unit into two separate storage racks
- You store smaller boxes and tools that fit within 16-inch depth
Skip if
- You require outdoor shelving that withstands rain and sun
- You need a wider shelf for large tool cases or bins
- You prefer wire shelves for maximum airflow and visibility
Verdict: REIBII 35.5" Galvanized 5-Tier Shelving suits indoor organizers who need corrosion resistance and flexible configurations. It fits buyers with narrow spaces or moisture concerns who value split-unit versatility over wide-span capacity.
Sterilite 5-Shelf Plastic Utility Storage Rack 2-Pack
Best for: light household storage in small spaces
- Tiers
- 5
- Width
- 36"
- Depth
- 18"
- Height
- 75.1"
- Per-Shelf Capacity
- 150 lbs
- Material
- Plastic
View on Amazon: Sterilite 5-Shelf Plastic Utility Storage Rack 2-Pack
This Sterilite unit offers five tiers of ventilated plastic shelving in a 36 by 18 inch footprint. The tubular frame supports 150 pounds per shelf, making it suitable for light household goods. Its adjustable design allows you to customize spacing for various items. The open structure promotes airflow to reduce moisture. It is a compact storage solution for small spaces like pantries or laundry rooms.
Pros
- Ventilated plastic shelves reduce moisture buildup
- Adjustable shelf heights for custom spacing
- Supports 150 pounds per shelf
- Compact 18-inch depth fits tight spaces
Cons
- Plastic construction lacks the durability of steel
- 150-pound per-shelf limit is lower than metal alternatives
- Shallow 18-inch depth restricts storage size
Good fit if
- You need a lightweight rack for dry areas
- You require adjustable shelf heights for small items
- You have limited floor space in a utility room
Skip if
- You store heavy tools or equipment
- You need wide shelves for large bins
- You require high weight capacity per tier
Verdict: Sterilite 5-Tier Plastic Utility Rack provides a moisture-resistant, adjustable storage option for light household items. It suits users with small spaces who prioritize ventilation over heavy-duty load bearing.
VEVOR 48" W 5-Tier Adjustable Shelving
Best for: heavy tool storage in garages
- Total Load Capacity
- 3000 lbs
- Tiers
- 5
- Width
- 48.4 inches
- Depth
- 20.6 inches
- Height
- 71.4 inches
- Per-Shelf Capacity
- 600 lbs
This VEVOR unit offers 48 inches of width and 5 tiers of storage. It supports 600 lbs per shelf and 3000 lbs total. The rib-reinforced SPCC carbon steel frame ensures stability. Adjustable gourd-shaped slots allow you to customize shelf heights. The snap-on design enables quick assembly without screws. It suits garages, workshops, and warehouses needing heavy-duty organization.
Pros
- 3000 lbs total load capacity
- 600 lbs per-shelf capacity
- Adjustable shelf heights via gourd-shaped slots
- Snap-on assembly without screws
- Split into two independent units
Cons
- 20.6-inch depth limits large item storage
- 53.5-pound weight requires careful handling
- No included hardware beyond rubber mallet and gloves
Good fit if
- You need to store heavy tools and equipment
- You want adjustable shelf spacing for varied items
- You prefer screw-free snap-on assembly
Skip if
- You require deeper shelves for bulky items
- You need a unit taller than 71.4 inches
- You want pre-assembled shelving without setup
Verdict: VEVOR 48-Inch 5-Tier Steel Garage Shelf provides robust support for heavy loads in tight spaces. It fits workshops where adjustable height and easy assembly matter most.
SISESOL 48" Wide Heavy Duty Garage Shelving, 3000 lbs
Best for: heavy garage storage with wide spans
- Total Load Capacity
- 3000LBS
- Width
- 47.6 inches
- Depth
- 23.6 inches
- Height
- 69.7 inches
- Material
- Steel
- Application
- Shop, warehouse, basement
View on Amazon: SISESOL 48" Wide Heavy Duty Garage Shelving, 3000 lbs
This SISESol unit offers 3000-pound total capacity with 47.6-inch width and 23.6-inch depth. The matte black steel construction includes lateral bars for stability and height-adjustable shelves. It features an anti-corrosion coating and interconnectivity for multiple units. This shelf suits garage or warehouse storage where high weight limits and wide spans are necessary.
Pros
- 3000-pound total load capacity
- 47.6-inch width for wide items
- Lateral bars prevent sway
- Height-adjustable shelves with locking pins
- Interconnectivity for multiple units
Cons
- 70-pound weight makes it heavy
- No mention of NSF certification
- No remote or app control
Good fit if
- You need to store very heavy tools
- You require wide shelf spans
- You want to connect multiple units
Skip if
- You need NSF certified storage
- You prefer lightweight assembly
- You require smart connectivity
Verdict: SISESOL 48" Heavy Duty Steel Shelving fits users needing high capacity and wide spans. It is ideal for heavy garage or warehouse storage where stability and interconnectivity matter most.
HOMEDANT 35.9" 5-Tier Metal Shelving 2-Pack
Best for: narrow spaces and quick assembly
- Tiers
- 5
- Width
- 35.9 inches
- Depth
- 16.2 inches
- Height
- 71.3 inches
- Material
- Metal
- Application
- Garage
This HOMEDANT unit offers five adjustable metal tiers in a 35.9-inch width and 16.2-inch depth. The boltless design allows for quick assembly without tools. It stands 71.3 inches tall and weighs 40.8 pounds. The black powder-coated finish suits garages and offices. It is ideal for organizing totes and appliances in tight spaces where a wider footprint is not available.
Pros
- Boltless snap-together assembly requires no drill or hardware
- Five fully adjustable metal tiers for varied item heights
- Powder-coated finish provides a clean look for living areas
- Made in Korea with precision manufacturing
Cons
- 16.2-inch depth is shallower than standard garage shelving
- 35.9-inch width limits capacity for wide items
- No listed weight capacity per shelf or total limit
Good fit if
- You need a narrow unit for tight spaces
- You want tool-free assembly for quick setup
- You store smaller totes or office supplies
Skip if
- You require heavy-duty storage for large appliances
- You need a wide footprint for bulky items
- You prefer specified weight limits for safety
Verdict: HOMEDANT 35.9" W 5-Tier Metal Shelf fits users with narrow spaces who value quick assembly over heavy-duty capacity. It is a practical solution for organizing smaller items in garages or home offices.
Seville Classics 5-Tier 60" W Steel Shelving
Best for: Heavy-duty commercial kitchen or garage storage
- Tiers
- 5
- Width
- 60 inches
- Depth
- 18 inches
- Height
- 72 inches (75 inches with wheels)
- Per-Shelf Capacity
- 600 lbs. per shelf on leveling feet
- Material
- Steel
View on Amazon: Seville Classics 5-Tier 60" W Steel Shelving
This 5-tier steel wire rack measures 60 inches wide and 18 inches deep. It supports 600 lbs per shelf on leveling feet. The unit weighs 95 lbs. Chrome plating resists corrosion in dry areas. NSF certification allows use in commercial kitchens or offices. Adjustable shelves fit at 1-inch increments. It suits those needing sturdy, industrial-style storage with verified safety standards.
Pros
- NSF certified for commercial and residential use
- 600 lbs capacity per shelf on leveling feet
- Chrome-plated steel resists corrosion in dry environments
- Shelves adjust at 1-inch increments
Cons
- 18-inch depth limits storage for large items
- Total capacity drops to 500 lbs when using wheels
- 95 lb weight makes repositioning difficult without wheels
Good fit if
- You need NSF-certified shelving for a kitchen or office
- You require 600 lbs per shelf for heavy loads
- You want adjustable shelf heights in 1-inch increments
Skip if
- You need deeper shelves for bulky items
- You plan to move the unit frequently on wheels
- You require a total system capacity over 4000 lbs
Verdict: Seville Classics 60" Steel Wire Rack offers verified commercial durability with high per-shelf capacity. It fits users who prioritize NSF certification and heavy loads in dry environments over deep storage or easy mobility.
Letaya 60" W 4-Tier Heavy Duty Shelving
Best for: storing very heavy, wide items
- Total Load Capacity
- 4000 lbs
- Tiers
- 4
- Width
- 60 inches
- Depth
- 24 inches
- Height
- 70 inches
- Material
- cold-rolled steel
This heavy-duty unit measures 60 inches wide by 70 inches high with a 24-inch depth. It features a monolithic steel column design that supports up to 4,000 lbs. The shelves are adjustable and detachable, secured with locking pins. It suits users needing maximum width and load capacity for bulky items in garages or workshops. The cold-rolled steel construction includes anti-corrosion coating for durability.
Pros
- 4,000 lbs total load capacity
- 60-inch width for large items
- Monolithic column design for stability
- Adjustable shelf heights with locking pins
Cons
- Only 4 tiers compared to 5-tier competitors
- Heavier build at 80 pounds
- No remote or app connectivity
Good fit if
- You need to store very heavy loads
- You require a 60-inch wide footprint
- You store bulky garage items
Skip if
- You need more than 4 shelves
- You prefer a lighter, easier-to-move unit
- You have limited width space
Verdict: Letaya 60" W 4-Tier Steel Shelving fits users who prioritize extreme weight capacity and wide storage over having more shelf levels.
Specifications side by side
| Spec | ROOMFAVE 40"W 5-Tier Heavy Duty Shelving | REIBII 72" 5-Tier Galvanized Shelving | Sterilite 5-Shelf Plastic Utility Storage Rack 2-Pack | VEVOR 48" W 5-Tier Adjustable Shelving | SISESOL 48" Wide Heavy Duty Garage Shelving, 3000 lbs | HOMEDANT 35.9" 5-Tier Metal Shelving 2-Pack | Seville Classics 5-Tier 60" W Steel Shelving | Letaya 60" W 4-Tier Heavy Duty Shelving |
|---|---|---|---|---|---|---|---|---|
| Total Load Capacity | 2300 lbs | 2020 lbs | not specified | 3000 lbs | 3000LBS | not specified | not specified | 4000 lbs |
| Tiers | 5 | 5 | 5 | 5 | not specified | 5 | 5 | 4 |
| Width | 40" | 35.5 inches | 36" | 48.4 inches | 47.6 inches | 35.9 inches | 60 inches | 60 inches |
| Depth | 20" | 16 inches | 18" | 20.6 inches | 23.6 inches | 16.2 inches | 18 inches | 24 inches |
| Height | 72.2" | 72 inches | 75.1" | 71.4 inches | 69.7 inches | 71.3 inches | 72 inches (75 inches with wheels) | 70 inches |
| Per-Shelf Capacity | 460 lbs | 404 lbs | 150 lbs | 600 lbs | not specified | not specified | 600 lbs. per shelf on leveling feet | not specified |
| Material | Metal framing, MDF panels | Galvanized steel, MDF | Plastic | SPCC carbon steel | Steel | Metal | Steel | cold-rolled steel |
| Features | not specified | Adjustable levels, boltless assembly | Adjustable shelves, ventilated surface | not specified | not specified | not specified | not specified | not specified |
| Application | Garage, warehouse, pantry, basement | Pantry, basement, garage, kitchen | Garage, basement, pantry, kitchen | Garage, workshop, warehouse | Shop, warehouse, basement | not specified | not specified | not specified |
| Color | Black | Galvanized | Grey | Black | Matte Black | Black | Steel | Black |
| Load Capacity | not specified | not specified | not specified | 3000 LBS | 3000 LBS | not specified | not specified | not specified |
| Dimensions | 20 × 40 × 72.2 inches | 16 × 35.5 × 72 inches | not specified | 20.6 × 48.4 × 71.4 inches | 23.6 × 47.6 × 69.7 inches | 16.2 × 35.9 × 71.3 inches | 18 × 60 × 72 inches | 24 × 60 × 70 inches |
| Weight | 41.3 pounds | not specified | not specified | 53.5 pounds | 70 pounds | 40.8 pounds | 95 pounds | 80 pounds |
| Size | 72.2" H x 40" W x 20" D | 36"W x 16"D x 72"H | 5 Shelf | 20" D x 48" W x 71.4" | 48"Wx24"Dx70"H | 35.9"W x 16.2"D | 5-Tier Shelving, 60" W x 18" D | 60" W x 24" D x 70" H |
| Model | 5T100Y050BPRO | Garage Shelving | 2 x 01553V01 | SS4820HA | YSZXEHHJ | 2026 SPEEDRACK NEW PARENT | SHE18603 | 1 |
If you require enclosed clothing storage instead of open shelves, the wardrobe buying guide details interior dimensions.
Frequently asked questions
How wide should my garage shelving be?
Choose a width that fits your wall space while leaving room for movement. The SISESOL and Letaya models offer 48 to 60 inches of width for wide-span storage. For tighter spots, the REIBII and HOMEDANT units provide narrower profiles around 35 inches. Measure your available wall length before buying to ensure a proper fit.
What depth do I need for garage shelves?
Standard depths range from 16 to 24 inches. The REIBII and HOMEDANT units sit at 16 inches, making them ideal for narrow spaces or pantry use. The SISESOL and Letaya offer 24 inches of depth, which accommodates larger bins and toolboxes. Match the depth to your largest storage items to prevent overhang.
Are plastic shelves suitable for heavy garage items?
Plastic racks like the Sterilite model are best for light household storage in small spaces. They provide moisture resistance and ventilation but lack the heavy-duty load bearing of steel units. Avoid using them for heavy tools or engine parts. Opt for steel shelving if you need to support significant weight without sagging.
How many tiers should my shelving unit have?
Most units feature five tiers, maximizing vertical storage in standard garages. The Letaya model offers only four tiers but compensates with a wider 60-inch span and higher weight capacity. More tiers help organize smaller items, while fewer tiers with wider spans suit bulky goods. Select based on whether you prioritize quantity or size.
Can I connect multiple shelving units together?
Some units, like the SISESOL, are designed for interconnectivity to create stable, wide storage walls. This feature is ideal for heavy garage or warehouse storage where stability matters most. Other models, such as the ROOMFAVE and HOMEDANT, are sold in packs but may not interlock. Check the specifications for connectivity options if you plan to expand your setup.
Is galvanized coating better than painted steel?
Galvanized finishes, like those on the REIBII unit, offer superior corrosion resistance. This makes them suitable for environments with moisture concerns or for use in pantries. Painted steel units, such as the VEVOR and SISESOL, provide robust support for heavy loads in dry garages. Choose galvanized if you store items in damp areas.
What is the maximum weight capacity for garage shelves?
Heavy-duty steel units like the VEVOR and SISESOL are rated for up to 3000 lbs. This capacity handles heavy toolboxes and bulk supplies without structural failure. Lighter plastic or narrow metal racks have lower limits. Always verify the total load capacity to ensure the unit can safely support your heaviest stored items.
Do I need NSF certification for garage shelving?
NSF certification is primarily for commercial kitchens or food-safe environments. The Seville Classics steel wire rack includes this certification for verified commercial durability. For standard garage or warehouse storage, this feature is unnecessary. Focus instead on load capacity and material strength, such as the steel construction found in most heavy-duty garage models.